1-Nonene, positive nonene, nonene, 1-nonene

CAS 124-11-8

EINECS 204-681-7

Chemical formula C9H18

Molecular weight 126.24

Density 0.73g/mLat 25°C(lit.)

Melting point −81°C(lit.)

Boiling point 146°C(lit.)

Flash point 115°F

Water soluble 1.117mg/L(25 ºC)

Vapor pressure 11 mm Hg (37.7 °C)

Vapor density 4.35 (vs air)

Hydrocarbon odor; like gasoline.

Properties: Flammable liquid

The products can be used in the manufacture of nonylbenzene, nonylphenol, etc., and also used in the production of additives in petroleum products, decanol and other plasticizers. It is derived from the polymerization of propylene.

Risk term R10 - Flammable.

R36/37/38 - Irritates eyes, respiratory system and skin.

R65 - May cause lung damage if swallowed.

S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S36 - Wear appropriate protective clothing.

S62 - If swallowed, do not induce vomiting; Seek medical attention immediately and show the container or label.

UN 3295

Customs No. 27101291

The downstream product is 1-nonylalcohol nonylphenol 1-decyl alcohol Barium dinonylnaphthalene sulfonate 1-bromononylacetic acid 2-nonester 1-chlornonyldecalaldehyde

Storage Precautions Store in a cool, ventilated warehouse. Keep away from fire and heat. The temperature in the storage room should not exceed 37℃. Keep the container sealed. Should be stored separately from oxidizer, do not mix storage. Explosion-proof lighting and ventilation facilities are adopted. Do not use mechanical equipment and tools that can easily generate sparks. The storage area should be equipped with leak emergency treatment equipment and suitable holding materials.

Dangerous characteristics: flammable, the vapor and air can form an explosive mixture, in the case of open fire, high heat cause combustion and explosion. Can react strongly with oxidizing agents. In case of high heat, polymerization reaction can occur, release a lot of heat and cause container rupture and explosion accident.

Harmful combustion products: carbon monoxide, carbon dioxide.

Extinguishing method: Spray water to cool the container and remove it from the fire to an open area if possible. Extinguishing agent: foam, carbon dioxide, dry powder, sand. It is useless to extinguish fires with water.